Difference between revisions of "adr"
m (use Related Pages for other adr- pages as it is more precise than See Also and consistent with hCard)
(FAQ: why adr?)
|Line 1:||Line 1:|
= adr =
= adr =
'''adr''' (pronounced "adder") is a simple format for marking up address information, suitable for embedding in (X)HTML, Atom, RSS, and arbitrary XML. '''adr''' is a 1:1 representation of the ''adr'' property in the vCard standard ([http://www.ietf.org/rfc/rfc2426.txt RFC2426]) in XHTML, one of several open [[microformats|microformat]] standards. It is also a property of [[hCard]].
Revision as of 18:46, 3 January 2007
adr (pronounced "adder"; FAQ: "why 'adr'?") is a simple format for marking up address information, suitable for embedding in (X)HTML, Atom, RSS, and arbitrary XML. adr is a 1:1 representation of the adr property in the vCard standard (RFC2426) in XHTML, one of several open microformat standards. It is also a property of hCard 1.0.
- 1 adr
- 1.1 Draft Specification
- 1.2 Introduction and Background
- 1.3 Semantic XHTML Design Principles
- 1.4 Format
- 1.5 Examples
- 1.6 Examples in the wild
- 1.7 Implementations
- 1.8 References
- 1.9 Work in progress
- 1.10 Discussions
- 1.11 Related Pages
This specification is (C) 2005-2021 by the authors. However, the authors intend to submit (or already have submitted, see details in the spec) this specification to a standards body with a liberal copyright/licensing policy such as the GMPG, IETF, and/or W3C. Anyone wishing to contribute should read their copyright principles, policies and licenses (e.g. the GMPG Principles) and agree to them, including licensing of all contributions under all required licenses (e.g. CC-by 1.0 and later), before contributing.
Inspiration and Acknowledgments
Thanks to everyone who participated in the Geo Microformat BOF at O'Reilly's Where 2.0 conference, and in particular to Nat Torkington and Vee McMillen of O'Reilly for arranging and hosting the BOF.
Introduction and Background
At the Where 2.0 conference in June 2005, there was widespread recognition that the community needed a way to simply and easily publish visible, extractable, address information on the Web, given how often bloggers, and numerous other sites publish address information. The geo microformat BOF discussed this very topic, and concluded with a consensus decision to just try using adr from vCard/hCard.
This specification introduces the adr microformat, which is a 1:1 representation of the aforementioned adr property from the vCard standard, by simply reusing the adr property and sub-properties as-is from the hCard microformat.
Publishers can both embed adr addresses directly in their web pages and feeds, as well as markup existing addresses in the context of the rest of the information in their web pages and feeds.
If the publisher knows and is publishing the name of the location in addition to its address, then the publisher MUST use hCard instead of just adr to publish the name and address of the location.
Semantic XHTML Design Principles
Note: the Semantic XHTML Design Principles were written primarily within the context of developing hCard and hCalendar, thus it may be easier to understand these principles in the context of the hCard design methodology (i.e. read that first). Tantek
XHTML is built on XML, and thus XHTML based formats can be used not only for convenient display presentation, but also for general purpose data exchange. In many ways, XHTML based formats exemplify the best of both HTML and XML worlds. However, when building XHTML based formats, it helps to have a guiding set of principles.
- Reuse the schema (names, objects, properties, values, types, hierarchies, constraints) as much as possible from pre-existing, established, well-supported standards by reference. Avoid restating constraints expressed in the source standard. Informative mentions are ok.
- For types with multiple components, use nested elements with class names equivalent to the names of the components.
- Plural components are made singular, and thus multiple nested elements are used to represent multiple text values that are comma-delimited.
- Use the most accurately precise semantic XHTML building block for each object etc.
- Otherwise use a generic structural element (e.g.
<div>), or the appropriate contextual element (e.g. an
- Use class names based on names from the original schema, unless the semantic XHTML building block precisely represents that part of the original schema. If names in the source schema are case-insensitive, then use an all lowercase equivalent. Components names implicit in prose (rather than explicit in the defined schema) should also use lowercase equivalents for ease of use. Spaces in component names become dash '-' characters.
- Finally, if the format of the data according to the original schema is too long and/or not human-friendly, use
<abbr>instead of a generic structural element, and place the literal data into the 'title' attribute (where abbr expansions go), and the more brief and human readable equivalent into the element itself. Further informative explanation of this use of
<abbr>: Human vs. ISO8601 dates problem solved
Note that all the properties in adr are singular properties, and thus the first descendant element with that class should take effect, any others being ignored.
Human vs. Machine readable
<abbr> element is used for a property, then the
title attribute of the
<abbr> element is the value of the property, instead of the contents of the element, which instead provide a human presentable version of the value.
Similarly, if an
<img> element is used for one or more properties, it must be treated as follows:
- For the
PHOTOproperty and any other property that takes a URL as its value, the
srcattribute provides the property value.
- For other properties, the
altattribute is the value of the property.
Sometimes only part of an element which is the equivalent for a property should be used for the value of the property. For this purpose, the special class name
value is used to excerpt out the subset of the element that is the value of the property. See hCard for details on this.
Root Class Name
The root class name for an adr address is
This is the list of properties in adr, taken from hCard:
type sub-property is omitted because without the context of a type of address for whom, it doesn't make much sense.
See hCard parsing, with the only difference being that "adr" is the root class name, rather than "vcard".
This section is informative.
Here is a sample adr:
<div class="adr"> <div class="street-address">665 3rd St.</div> <div class="extended-address">Suite 207</div> <span class="locality">San Francisco</span>, <span class="region">CA</span> <span class="postal-code">94107</span> <div class="country-name">U.S.A.</div> </div>
This adr might be displayed as:
665 3rd St. Suite 207 San Francisco, CA 94107 U.S.A.
See hCard example ADR for more examples.
See adr examples for additional uses of ADR.
Examples in the wild
This section is informative.
The following sites have published adrs, outside their normal context of hCards, and thus are a great place to start for anyone looking for examples "in the wild" to try parsing, indexing, organizing etc., in addition to hCard examples in the wild. If you find adrs outside of hCards anywhere else, feel free to add them to the top of this list. Once the list grows too big, we'll make a separate wiki page.
(See also hCard Examples in the wild)
This section is informative.
The following implementations have been developed which either generate or parse adrs outside the context of hCards. If you have an adr implementation, feel free to add it to the top of this list. Once the list grows too big, we'll make a separate wiki page.
- GreaseRoute is a GreaseMonkey user script (also available as a simple Firefox Extension) which will add icons for displaying the location, or route to, an adr using a MapQuest map. The route is displayed from the starting location based on the viewer's IP-Address as determined by the HostIP geolocation service.
- GreaseRouteEmbed is another GreaseMonkey user script that will actually embed a route image in the webpage when the user clicks the "route" link.
- GeoPress is a WordPress plugin that supports embedding adrs, geo, maps (dynamically switchable between Google-Yahoo-Microsoft Maps), and GeoRSS feeds.
- pnh_mf is a plugin for Textpattern that supports embedding adrs and other microformats in templates and blog posts. Written by Chris Casciano.
- The hCard creator, though it creates complete hCards, can also be used simply to create adrs by filling out the address portion and simply copy and pasting the <div class="adr"> element and its contents.
Work in progress
This specification is a work in progress. As additional aspects are discussed, understood, and written, they will be added.
- If you have any questions about hCard, check the hCard FAQ first, and if you don't find answers, add your questions! (Odds are that any adr question will apply to hCard 1.0 as well).
- See also for other methods of feedback.
- Please add any issues with the specification to the separate hCard issues document. Ditto.