Difference between revisions of "hcard-issues-closed"

From Microformats Wiki
hcard-issues-closed
Jump to navigation Jump to search
m (typo)
m (Replace <entry-title> with {{DISPLAYTITLE:}})
 
Line 1: Line 1:
<entry-title>hCard closed issues</entry-title>
+
{{DISPLAYTITLE:hCard closed issues}}
  
 
== closed issues ==
 
== closed issues ==

Latest revision as of 16:26, 18 July 2020


closed issues

hCard 1.0 closed issues that have no further actions to take.

closed 2005

Closed issues that were raised in 2005.

  • 2005-06-30 raised by Jack L. Wolfgang II. Please feel free to move these to the FAQs if they are better suited there.
    1. Handling middle names and suffixes: How does one handle middle initials/names in the hCard format and suffixes that are not honorific suffixes (e.g. Jr., Sr., II, III, etc. as opposed to Ph.D., Esq., M.D., etc.)?
      • A: ACCEPTED FAQ. hCard is based of the RFC2426 spec. I you want to use a middle initial it can be expanded using the abbr element. <abbr title="[MiddleName]" class="additional-name">M</abbr>. Honorific Suffixes in the RFC include Jr., Esq. and other inherited suffixes, so I would just use <abbr class="honorific-suffix" title="Junior">Jr.</abbr> etc. See hCard FAQ: marking up suffixes for more details.
    2. Handling different types of addresses: How does one handle the TYPE (e.g. postal, work, etc.) specification for addresses as specified in RFC 2426 Section 3.2.1?
      • A: ACCEPTED FAQ. If you want to add a type to certain elements, including address and telephone it may be done in the following manner:
<span class="adr">
<span class="type">work</span>
...
</span>

See hCard FAQ: multiple addresses for detailed examples.

<span class="tel">
 <span class="type">work</span>
 <span class="value">123.555.1212</span>
<span>

See hCard authoring: phone numbers for more detailed examples.

Note: the TYPE needs to be a sub-element of the property (adr, tel, etc) NOTE: EMAIL does NOT have many TYPE attributes, only INTERNET and X400


  • 2005-07-22 raised by DanConnolly
    1. ...in my cellphone/sidekick address book, I have a number of entries for companies. I wrote asHCard.xsl to convert the data from RDF to hCard, but I don't know what to do with entries for companies, since FN is mandatory in hCard.
      • A: ACCEPTED. This should at least be an FAQ. "How do I write an hCard for a company?" The vCard specification is silent on this point (entries for companies). Thus there are two options as far as the hCard standard is concerned:
        1. Set "fn" and "org" to the same value. E.g. <span class="fn org">W3C</span> (recommended)
        2. Set "org" as usual, and set "fn" explicitly to empty. E.g. <span class="fn"></span><span class="org">W3C</span> or
          • Simply have no "fn", and on the parsing side, if there is no "fn" present, but there is an "org" property, then duplicate the "org" value as "fn"
      • The last two options are effectively the same and are both not explicit and easily confusable with a "missing data" condition. Thus option 1 is preferred. For converting applications (hCard to vCard), they may consider using proprietary extensions to make the distinction explicit in generated vCards, based on either case 1 or 2 above. E.g. Apple's Address Book application supports the property: X-ABShowAs:COMPANY
      • We are looking for descriptions of how other vCard supporting applications treat "company" vCards differently from "person" vCards. Please provide descriptions here:
        • Address Book / MacOSX.3:
          • Export (e.g. drag & drop to desktop, view in text editor)
            • Sets "FN" and "ORG" to the name of the company
            • Sets proprietary X-ABShowAs:COMPANY
          • Import (e.g. edit in text editor, drag & drop from desktop)
            • By setting "FN" and "ORG' to the same name (e.g. Banana Computers Inc.)
            • And removing any proprietary properties (e.g. X-ABShowAs)
            • Address Book user interface showed new vCard as a "company" contact rather an a person
        • Address Book MacOSX.4:
          • same results as above -RyanKing
        • The Danger Hiptop (aka T-Mobile Sidekick) address book:
          • Export (e.g. email to a mailing list)
            • Sets "FN" to the empty string and puts the company name in "ORG".
          • Import - could not find a way to import a .vcf, by email, IM, or other means into the Sidekick.
        • Contacts / Outlook 2003 Windows
          • Export (e.g. Highlight contact, File, Save As, vcard)
            • Sets "N" and "ORG to the name of the company
            • Sets "FN" to value in "File as:"
        • Add another vCard app here.
      • RESOLVED. hCard now specifically describes organization contact info, and there is also now an FAQ regarding this: hCard FAQ: How do you mark up an organization.


  • 2005-07-23 raised by DanConnolly
    1. Are class names case sensitive or not? hCard 1.0 says "If names in the source schema are case-insensitive, then use an all lowercase equivalent."
      • A: ACCEPTED FAQ. Class names are case sensitive per the HTML4 specification. Hence hCard explicitly specifies the case of class name to use for source schema names that are case-insensitive. FAQ added: FAQ: Are class names case sensitive.
    2. ...but I find example data with class="Given-Name"
      • A: ACCEPTED RESOLVED. That is from an older preliminary version of the hCard spec which used mixed case class names. Such class names are no longer valid hCard. Please note which examples (URLs) are using the older class names and hopefully we can get them fixed. FAQ also added: hCard FAQ: Can hCards use variants of properties like Given Name
        • A: By Brian Suda I have fixed all the references in the hCard Brainstorming page to reflect the lower-case style, this is a hold-over from the original design, X2V has been updated.
    3. ..and code that supports it [data with class="Given-Name"].
      • A: ACCEPTED RESOLVED. Any code supporting the older class name(s) is for backward compatibility only, and should be phased out. Any new hCard code SHOULD NOT support such mixed case class names.
        • rfc2629xslt.html uses Street-Address, Family-Name, etc.
        • X2V Version 0.5.1 2005-07-08 supports Family-Name etc.
          • A: By Brian Suda I agree that the upper-case class names can be removed from the code, this was a hold-over and will be trimmed.
    4. The ul/ol stuff for multiple values of a property seems to be in the X2V code and in hCard Brainstorming but not in the hCard 1.0 spec.
      • A. ACCEPTED RESOLVED. This needs to be added to the spec. 2005-11-08 Update: the way multiple values has been updated to work much better and not require ul/ol.
    5. the hCard Profile says country-name but X2V and lots of the data I've seen says country
      • A. ACCEPTED RESOLVED. RFC 2426 clearly says "country name" in both the prose and the grammar, thus "country-name" is the correct class name to use. If X2V uses just "country", it needs to be fixed to use "country-name", and any such examples as well. Please note which examples (URLs) are using the class name "country" and hopefully we can get them fixed. FAQ also added: hCard FAQ: Can hCards use variants of properties like Given Name
        • A: By Brian Suda I have fixed all the references in the hCard Brainstorming page to reflect the proper country-name, X2V will support this in the next iteration when i fix several bugs at once.


  • 2005-08-12 raised by Jack L. Wolfgang II. Use of mailto transport functionality for the E-Mail address field.
    1. As stated in the hCard Brainstorming document, mailto is abused by spammers. As a result, many organizations have moved to form-based contacts as opposed to mailtos. According to RFC 2426, Section 3.3.2, "A non-standard value can also be specified." Does this refer to a non-standard e-mail address value or type value?
  • 2005-10-30 raised by Julian Reschke.
    1. Several implementations (Which ones? Please provide links.) seem to assume that any class attribute that contains the substring "vcard" indeed signals the presence of vcard information. Not so: there are examples (What examples? Please provide links.) of where a token in the class attribute indeed only starts with "vcard", in which it should be ignored. Implementations using XPath (such as XSLT or Greasemonkey scripts) should be advised to do a contains(concat(@class,' '),'vcard ').
      • REJECTED VAGUE. Which implementations? And which examples?
      • (Note: the code contains(concat(@class,' '),'vcard ') above is broken see parsing-microformats#Parsing_class_values for a correct example --Robert Bachmann)
      • CLOSING DUE TO INSUFFICIENT INFORMATION. No specific implementation examples have been provided that show any problems with substring matches of "vcard". Tantek 07:00, 16 October 2009 (UTC)


  • 2005-12-08 raised by Kenny Heaton.
    1. The specification gives no way to to declare a telephone extension, as in (800) 234-5678 ext. 101

closed 2006

Closed issues that were raised in 2006.

  • 2006-01-21 raised by Ben Boyle.
    1. Have run into issues trying to use definition lists with hCard, specifically around nesting requirements for tel where the DT element takes a class "type" (e.g. Telephone, Facsimile) and the DD element marks the value. It is invalid to place any other elements within a DL that wrap around the DT/DD pairs so there is no available element to assign the class "tel" to. XHTML2 proposes a DI element that will resolve this issue. I am hoping for an interim solution for those that wish to use definition lists, perhaps that "any class that would be placed on the DI parent (in XHTML2) must instead be placed on the first DT element". I realise this will cause headaches for those implementing hCard parsers. I'd also like to note this may affect other (current or future) microformats and relates to the general hassle of definition lists in current (X)HTML recommendations. For your consideration - thanks!
      • ACCEPTED PARTIAL FAQ. An example has been added for how to use a semantic DL to markup a microformat such as hCard to the faq:Why do the examples use span and div.
      • REJECTED LACK OF REAL WORLD EXAMPLES. No URLs have been provided that publish the specific "Telephone"/"Facsimile" in DT mark up pattern mentioned in the issue.
      • REJECTED WORKAROUND AVAILABLE.
        1. Consider using the Value Class Pattern inside the <dd class="tel">, e.g. <span class="type"><span class="value-title" title="fax"> </span></span>
        2. Don't use definition lists in this manner. The description of a definition should go completely in the DD element, and thus you should be able to put the class on that.
        3. Use separate DLs in the cases where you would otherwise have needed a DI element.
      • REJECTED XHTML2 ABANDONED. The W3C is abandoning XHTML2 as of 2009-12, thus there is no need to plan for a DI element.


  • 2006-01-23 raised by David Janes (?).
    1. Issue 1: Specifying Authoritative or Canonical or Official hCard
      • Use of rel="me"?
        • Only specifies an alternate version, not necessarily the canonical version
        • rel="me" must be symmetrical, per the XFN spec. What exactly does this mean for this use?
        • "me" (and, depending on usage, "self") are not appropriate for content referring to third- parties. Andy Mabbett
        • +1 REJECTED bad overloading of rel="me" to attempt to make it explicity imply some logic for authoritative/canonical/official. Tantek 00:28, 30 October 2009 (UTC)
      • Suggestion: use rel="me self". Adopt "self" semantics from Atom which means "the", or controversially "alternate, equivalent" version
      • Suggestion: use rel="via". Per RFC 4287, via "signifies that the IRI in the value of the href attribute identifies a resource that is the source of the information provided in the containing element." from Ryan Cannon.
        • REJECTED different problem. The notion of where the data came from (i.e. "via") is different from content asserting that it is authoritative/canonical/official. Tantek 00:28, 30 October 2009 (UTC)
      • Other suggestions? "authoritative", "canonical"?
        • REJECTED inadequate description of what those terms would mean (thus they would inevitably be incompatibly used). Tantek 00:28, 30 October 2009 (UTC)
      • How does this relate to authentication/trust issues? Is this a different problem with a different scope?
        • (microformats-discuss list) Joe Andrieu: The concept behind an "authoritative" hCard rather than "definitive" or "canonical" one was that "authoritative" would explicitly be a claim by the author of the hCard regarding its authority in describing the subject of the hCard, i.e., use this hCard as the one true source of this individual's contact information.
        • REJECTED different problem. To summarize: authentication/trust is a separate topic. See oauth for starters. Tantek 00:28, 30 October 2009 (UTC)
      • What exactly is the scope of the problem to solve here?
        • (IRC) (10:47:44) sreynen: for example, all of the examples I've seen involve a single person publishing multiple hCards of himself
        • (IRC) (10:48:13) sreynen: yet many people are talking about 3rd parties publishing hCards and pointing back to the subject's own hCard
        • +1 REJECTED insufficient (as in, none provided) real world examples of the issue. Tantek 00:28, 30 October 2009 (UTC)
      • ACCEPTED PARTIAL. MULTIPLE ISSUES AND BRAINSTORMING. The questions of authoritative, and canonical, and representative are likely different questions and must be deconstructed into separate issues. - Tantek 00:28, 30 October 2009 (UTC)
        • See representative hCard for the resolution of the the representative hCard question.
        • "authoritative" hCard needs a better definition of the specific question, and documented real world examples where it would be useful. Closing due to lack of provided real world examples.
        • "canonical" hCard needs a better definition of the specific question, and documented real world examples where it would be useful. Closing due to lack of provided real world examples.
        • Use "url uid" when linking to a canonical version of the hCard for a specific site - as now documented in hCard Authoring: canonical hCard within a site.


  • 2006-01-28 raised by Tantek on #microformats
    1. Is hCard is really appropriate for a named phone bridge, or do we need something else for a named phone numbers that are neither people nor organizations. For example see the "Zakim" hCard on http://www.w3.org/2005/12/allgroupoverview.html
      • ACCEPTED BRAINSTORMING. Though hCard has been expanded to allow named locations, those are *physical* locations, and hCard is not really appropriate for named virtual locations (aka virtual addresses) such as a phone number or URL. However, given the use case of having a contact in one's address book for "Zakim" in order to "dial Zakim" as may be recommended in a working group IRC discussion, perhaps Zakim is a virtual entity like an organization. Update (2009-312): I've captured this scenario in hCard brainstorming: named phone numbers. The 2005 W3C All Group overview no longer mentions Zakim so this is a past or theoretical example at this point. In addition this question has not come up again, and thus the resolution has been changed from FAQ to BRAINSTORMING, and as captured as such, this issue is closed. Tantek 05:05, 9 November 2009 (UTC)


  • 2006-02-03 raised by Brian
    1. We can use the Geo microformat in hAtom 0.1 to represent GeoRSS element
      • ACCEPTED DOCUMENTATION. Yes, this should be documented in hatom-examples, and has been moved to hAtom Brainstorming as a suggestion to be explored and written up there accordingly. -Tantek


  • 2006-02-13 raised by Eron Wright
    1. Few systems contemplate the altitude component of a coordinate, yet it exists. Altitude becomes important when working with 3D mapping software such as Google Earth. Indeed, the geocoding service that Google Earth uses returns a three-dimensional coordinate. I suggest that hCard provide explicit support for altitude.
      • REJECTED POSTPONED. Not in vCard. There is no "altitude" component in vCard (RFC 2426), and thus (certainly for now) there won't be any in hCard. If a new version of vCard were to come out with altitude, then we would add it to hCard. At some point we may also consider adding explicit extensions beyond vCard, but if we were to do so, we would capture them first on the hCard Brainstorming page. See vCard suggestions: elevation, and Geo Elevation.


  • 2006-02-19 raised by Miika Mäkinen.
    1. Couldn't the types for tel numbers be specified in a class? Now, for a phone number one needs to add the type as "visible" text, which is not always preferred. For example, type "Work", many times more suitable label could be "Office" or similar and sometimes you might not want to display any type information at all.
      • REJECTED TRIED ALREADY. Using class names for the "type" of a tel or adr was attempted, and failed in many situations. In addition, the "type" information is actual data, not just a property name, and thus deserves to be in the visible markup. Note that you can use abbreviations, e.g. <abbr class="type" title="work">W:</abbr> in order to present the type in a way that may better fit in with the rest of your presentation. Update (2009-312) see also the Value Class Pattern for how to provide tel 'type' information with other labels. - Tantek 05:11, 9 November 2009 (UTC)


  • 2006-02-23 raised by Jesse Skinner and Ben Buchanan.
    1. Are multiple URLs allowed? The Property List suggests not, whereas email and tel have multiple type/value pairs. However, the parsing page suggests multiple URLs are OK. Either way, it seems clear that a type cannot be associated with a URL. So how exactly does hCard deal with multiple URLs?
      • RESOLVED FAQ: Multiple URLs are allowed. Some consuming agents (Apple's AddressBook.app among them) don't have an interface for producing multiple URLs, but they are still valid in vCard and therefore hCard. --RyanKing 17:58, 12 Jun 2006 (PDT)
      • FAQ documented: hCard FAQ: can an hCard have multiple URLs


  • 2006-03-07 raised by Tantek.
    1. Issue 1: In 99% of the cases I am finding the need to explicitly do "n" markup, the person has a three word fn which is in the form "given-name additional-name(or initial) family-name". Should we make three word fn's into another shorthand notation to make this easier for authors?
      • REJECTED. I have seen sufficient additional cases in systems that have full names but not structured names that have multi-word family names that I think such an algorithm may cause minor data corruption where part of a family-name is interpreted as an additional-name. -Tantek. Update (2009-312). keywords: n shorthand, three word fn shorthand. some examples:


  • 2006-04-06 raised by Evan.
    1. What is the relationship between the CATEGORY property and rel="tag"? Can you add a tag to an hCard? How can you add a tag to a particular hcard on a page without tagging the other cards on a page?
      • ACCEPTED. Categories can optionally be represented as tags. The classname 'category' should always be used, but rel="tag" can optionally be used (in addition to the category classname). In the case that a rel-tag tag is used, the tag (as defined by rel="tag") is used for the category. Examples: (1) <span class="category">food</span> and (2) <a class="category" rel="tag" href="http://example.com/food">Food!</a>. --RyanKing 15:16, 13 Jun 2006 (PDT)
      • FAQ: hCard FAQ: How are category and rel-tag related



  • 2006-10-21 raised by Andy Mabbett
    1. There should be some way to say that the URL of an hCard or hCalendar event is the URL of the page itself, without having to include a redundant, and accessibility-damaging link to that page, on the page itself.
      • Quite often I see "a" webpage accessible with several different URLs. Typically 1 URL is the "preferred" URL, expected to have a long lifetime. Sometimes other URLs are "convenience" URLs that may have been linked to in the past, but are expected to go away soon, which resolve to the same file (the "latest version"). Then there are "archive" URLs that show an exact copy of that webpage as it appeared some time in the past. I think we want to always use the "preferred" URL, no matter which of those URLs we happen to stumble upon first -- so the URL is not actually redundant. (How exactly is it "accessibility-damaging" for a page to link to itself? Could you explain or add a link to an explanation?) --DavidCary 17:44, 5 Apr 2007 (PDT)
        • "How exactly is it "accessibility-damaging" for a page to link to itself?" - Novice user clicks on link; nothing (it appears) happens. Repeat ad infinitum, until user leaves site to do something else. Andy Mabbett 02:43, 6 Apr 2007 (PDT)
          • That scenario demonstrates more of a usability issue than an accessibility issue. Also, given that numerous (nearly all?) social network sites (e.g. sites with hCard supporting user profiles) provide profile pages that link to themselves, this issue (and the above hypothesized user behavior) may be a theoretical misconception, and require data/studies to back it up, since modern accepted practice contradicts this hypothetical issue as currently described.
      • A: REJECTED THEORETICAL AND MISCONCEPTION. As noted, given that numerous (nearly all?) social network sites (e.g. sites with hCard supporting user profiles) provide profile pages that link to themselves, the usability aspect of this issue may be a theoretical misconception, and require data/studies to back it up and thus for now is rejected. As far as any accessibility issue - if this were truly an accessibility issue, then accessibility tools such as screen readers would unlink/delink or otherwise not make clickable any links from a page to itself, thus solving any such supposed problem at the tool level. If accessibility tools are NOT doing so, that is, leaving pages links to themselves active, then they have likely decided that such links are not an accessibility problem.
      • A: 2009-313 UPDATE: ACCEPT AUTHORING GUIDELINE. There are three cases to this issue which would help as an hCard authoring tips example to illustrate this issue and provide authoring guidance. Described below, and now added to hCard authoring: URL of an hCard being the page itself. Obviously similar techniques can be used for events, reviews etc.
        • First, as stated above, numerous social network sites' profile pages link to themselves, usually on thumbnail icons, for whatever design reasons they have - whether or not this behavior is (un)desirable is irrelevant to the practicality of marking them up - if a site chooses to do so, it can markup such links with class="url" or perhaps class="url uid".
        • Second, as of 2009 many (most?) profile pages have some form of live or updating content, and thus it makes functional sense to include a link to the page itself labeled something like "reload" or "refresh". When the user clicks the link, it's not that "nothing happens" as claimed above, but rather, the user is shown new content. If the site provides updates dynamically (e.g. via XHR), then when doing so they can also use javascript+CSS that hides any such manual reload/refresh link.
        • Third, for profile pages which neither link to themselves as part of their design, nor have any live/updating content, the author can include an empty hyperlink with an empty href attribute (which is resolved as a relative URL to the page itself) to provide an invisible hyperlink to the page itself which is thus both not typically clickable (since it takes up no space), nor has any content which could be erroneously read by a screen reader. E.g. <a class="url" href=""></a>. This authoring suggestion is probably good enough to handle this third, now perhaps rarest case, though it would be useful to to have some test cases that can be run in various browsers / assistive technologies to see what they do. Another (lengthier) suggestion would be to use Value Class Pattern value-title technique, e.g.: <span class="url"><span class="value-title" title="http://example.com/user/john"> </span></span>.
  • 2006-11-16 raised by Andy Mabbett
    1. The "type" for "tel" lacks a "textphone" option (for the devices used by, e.g., people who are deaf or have speech difficulties. Example: Birmingham City Council (303 1119).
      • A: REJECTED. This is a vCard issue, as the "type" taxonomy for "tel" is determined by vCard. We are not presently extending hCard beyond the properties and values in vCard.
        • I'm not clear how you can "reject" a provably factual statement. What's the process of suggesting an update to vCard? Andy Mabbett
          • A: ACCEPTED PARTIAL RESOLVED. Unfortunately it is not clear what the process is for updating vCard. However, we can at least capture suggestions for improvement to vCard from this community which may be helpful once the process for updating vCard is understood. I've created vCard suggestions for this purpose and added this suggestion. - Tantek
            • The vCard spec is updated by RFC, for example RFC 4770. Andy Mabbett 06:22, 12 Jan 2007 (PST)
              • A: COLLECTED AND CLOSED. The suggestion has been documented in vCard suggestions and it's now up to vCard 4 to see it is adopted or not. If it is, then hCard 1.1 can consider adding it.
  • 2006-12-15 raised by WizardIsHungry
    1. [Moved from a user talk page] Hey, why is hiding semi-useful information using CSS bad? The Geo and Address stuff wouldn't be enough to contact me, but I would like there so bookmarklets, crawlers, greasemonkey etc can manipulate it. Is there a policy on using CSS hiding of fields? Thanks :)
      • I guess we can't rely that anything that consumes hCards is normalizing it to a particular format instead of just taking all the xml inside the hcard classed block and sticking it somewhere. If it does just store it as a string, then generating html from it will yield the same hidden fields. Perhaps hiding fields by applying a stylesheet to the relevant hcard styles is ok, but not hiding them using in-line CSS styling. Feedback? --Jon Williams 10:28, 22 Dec 2006 (PST)
      • Furthermore, hcard-example1-steps shows using inline CSS to hide fields. What gives? I still think this is an open issue; particularly the distinction between external stylesheet hiding and inline rules though. --Jon Williams 13:33, 5 Jan 2007 (PST)
      • Should this be on Microformat Issues? --Jon Williams 13:37, 5 Jan 2007 (PST)
        • REJECTED. The example you cite is the first of several steps, which refine and improve the first step's suboptimal hCard, not intended as examples for publication.
          • The question is: why is this considered suboptimal if it is ok to hide the entire card?'
            • REJECTED. It is not OK to hide the entire card.
              • Here are a number of examples of hiding the entire card, taken from hCard Examples in the wild: [1] [2] [3] [4] -- Could someone link to where this was discussed and decided in the past, as it seems like this is being governed by fiat. Even if you don't care to have consensus, but could you at least justify this? This stonewalling is rather rude. --Jon Williams 13:24, 9 Jan 2007 (PST)
      • hcard-brainstorming#CSS_Styles explicitly permits this. I'm going with what they say.
        • REJECTED. Note that section explicitly says: "WARNING: This is very much recommended AGAINST". -Tantek

closed 2007

Closed issues that were raised in 2007.

  • 2007-01-26 raised by JamesCraig.
    1. Proposal to use the class attribute for qname prefixed type values (and others such as dtstart values), AKA meta classes.
<span xml:lang="en">Home (preferred): <span class="tel type:home type:pref">+1.415.555.1212</span></span>
<span xml:lang="es">Casa (preferido): <span class="tel type:home type:pref">+1.415.555.1212</span></span>
  • 2007-05-08 raised by Tantek as a result of a message from Andy Mabbett on microformats-new
    1. How do you distinguish a place vs. an organization hCard, both from the perspective of a publisher (author) wishing to express the particular semantic, and from the perspective of a parser (developer) wishing to discern the difference? This is different from the 2006-12-15 issue on semantic specificity because this issue is *specifically* about place vs. org, rather than conflating that with person.
    2. Note: mailing list post cited in 2006-12-15 issue is quite clear; it says "when a spider finds an hCard, it can't tell if it is a person, company, organization, or place.".
      • DUPLICATE. See 2006-12-15 issue.

closed 2008

Closed issues that were raised in 2008.

  • 2008-12-16 raised by Tantek Çelik
    1. The "n" optimization rule for turning an fn of "WORD C." into an n given-name initial of "C" and family-name of "WORD" should be dropped, as it was not based on sufficient usage in practice (based on why I put it in there in the first place), and (a) it actually interferes with some broad usage in historical practice, e.g. on Pownce user's names were abbrevated as "GIVEN F." where GIVEN was their given-name and F was there family-name initial and (b) may have problems with non-Western name abbreviations also.
      • suggested resolution: drop respective "n" optimization rule, and suggest markup for any use of abbreviated name components with abbr tag, e.g. <span class="fn">Tantek <abbr>Ç.</abbr></span>
        • Could retain the rule when a comma or semicolon is found between the two parts though. TobyInk 22:39, 16 December 2008 (UTC)
          • At this point, unless sufficient real world sites are documented which use that practice of "a comma or semicolon is between the two parts", it is preferable to drop it, for simplicity. Tantek 23:17, 3 June 2009 (UTC)
      • ACCEPTED. Resolution: Drop "WORD C." "n" optimization rule, noting the past examples of Pownce (formerly at http://pownce.com) and Dodgeball (formerly at http://dodgeball.com/), and the more recent example of Foursquare (originally at http://playfoursquare.com).
      • CLOSED. Resolution implemented in hCard 1.0. Tantek 02:22, 16 April 2010 (UTC)

closed 2009

Closed issues that were raised in 2009.

  • ...

see also